| Customization: | Available |
|---|---|
| Additional Capabilities: | Vacuum |
| After-sales Service: | Engineers Available to Service Machinery Overseas, Free Spare Parts, Online Support, video Technical Support |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
KB 10L Hydraulic Lift Vacuum Homogenizing Emulsifying Machine
Details For Product:
| No. | Name | Technical Specification | Remark | |
| 1 | Main pan | (1)Working volume: 10L; Total volume: 13L (2)Three-layer stainless steel structure, with upper and lower heads (3)Inner pot working pressure: -0.085 - 0.02 MPa (4)GMP standard - 300# mirror finish both inside and outside |
||
a |
Mixing system |
(1)Frame type edge scraping - bottom scraping - single fixed impeller - mixing impeller
(2)Four-stage motor power: 0.55KW; Delta variable frequency speed regulation: 0 - 63r/min(3)Polytetrafluoroethylene Class A white scraper (4)Reducer: Guomao; Reduction ratio: 1 - 23 (5)Mechanical seal: Adopted with frame oil seal and Borgmann mechanical seal |
||
b |
Homogeneous system |
(1)upper high shear homogenizer (German technology, CNC integrated molding)
(2)Motor power: 0.75KW; Delta variable frequency speed regulation: 0 - 3600 r/min
(3)Mechanical seal: double-end face water-cooled mechanical seal |
||
c |
Pot structure |
(1)Inner layer material: Stainless steel SUS316L, thickness: 5mm
(2)Middle layer material: Stainless steel SUS304, thickness: 5mm
(3)Outer layer material: Stainless steel SUS304, thickness: 3mm
(4)Insulation and heat insulation layer: Silica aerogel fiber cotton, thickness: 25mm
|
||
d |
Lid accessories |
1.Vacuum pressure gauge 2.Feed inlet with filter 3.Vacuum breaking respirator 4.Sight glass with scraper 5.Flavoring material hopper 6.Sight glass (light inside the pot) |
GMP sanitary pipe fittings | |
e |
Heating/Cooling | Double-layer electric heating; Power: 2KW * 1 unit; It can also be cooled by water. | ||
| Temperature display | Bottom insert type, PT100 (up to 140ºC) | |||
| Opening method | Hydraulic lifting; Power: 0.55KW | |||
| Discharge method | Pouring out the material | |||
| f | Vacuum system | Rotary vane vacuum pump Ultimate vacuum ≤ 0.5 Pa Power: 0.18 KW Suction volume: 1.8 m³/h |
||
| 2 | Water pot | Capacity:8L | ||
| a | Mixing system | (1)Upper part is a center-biased wavy wheel mixer; material: stainless steel SUS316L (2)Mixing power: 0.12KW; rotational speed: 1440 r/min |
||
b |
Pot structure |
(1)Inner layer material: Stainless steel SUS316L, thickness: 4mm (2)Middle layer material: Stainless steel SUS304, thickness: 4mm (3)Outer layer material: Stainless steel SUS304, thickness: 3mm (4)Insulation and heat insulation layer: Silica aerogel fiber cotton, thickness: 25mm |
GMP standard Polishing of internal and external surfaces with 300# grit |
|
c |
Heating/Cooling | Internal layer electric heating; Power: 2KW * 1 unit | Working pressure<=0.2MPa | |
| Temperature display | Bottom-insert type, PT100 (less than or equal to 140ºC) | |||
| Opening method | Half-open type for convenient material addition: Stainless steel SUS316L | |||
| Discharge method | Stainless steel full ball valve | |||
| 3 | Oil pot | Capacity:5L | ||
| a | Mixing system | (1)Upper part is a centerless wave-type mixer; material: stainless steel SUS316L (2)Mixing power: 0.12kW; rotational speed: 1440 r/min |
||
b |
Pot structure |
(1)SUS316L,Inner layer material: Stainless steel SUS316L, thickness: 4mm (2)Middle layer material: Stainless steel SUS304, thickness: 4mm (3)Outer layer material: Stainless steel SUS304, thickness: 3mm (4)Insulation and heat insulation layer: Silica aerogel fiber cotton, thickness: 25mm |
GMP standard Polishing of internal and external surfaces with 300# grit\ |
|
c |
Heating/Cooling | Internal layer electric heating; Power: 2KW * 1 unit | Working pressure<=0.2MPa | |
| Temperature display | Bottom-insert type, PT100 (less than or equal to 140ºC) | |||
| Opening method | Half-open type for convenient material addition: Stainless steel SUS316L | |||
| Discharge method | Stainless steel full ball valve | |||
| 4. | Electronic control | |||
a |
Electric cabinet | (1)The outer shell of the control cabinet is made of stainless steel. (2)Material: Stainless steel SUS304; |
||
| Electrical components | Buttons, indicator lights, time delayers, ammeters, voltmeters, temperature controllers, circuit breakers, AC contactors, relays, transformers, current transformers | |
||
| 5 | Safety protection |
(1)The cover cannot be lifted in a vacuum state.
(2)The cover cannot be lifted in a stirring state.
(3)After pouring, it does not reset and the cover cannot rise and fall.
(4)The cover does not rise to the highest point and cannot be poured out of the pot body.
(5)The stirring and homogenization are overloaded or the power grid is overvoltage, and the machine will automatically shut down.
(6)When the pressure of the cooling water in the main pot exceeds the set pressure, it will automatically drain.
(7)If the cover is not lifted to the correct position when it is lifted or lowered, the stirring cannot be started.
(8)The electric control system is equipped with an emergency stop switch. In case of emergency, it will immediately stop.
(9)The equipment is labeled with safety signs (in Chinese and English).
|
||
| 6 | Accessories | 1.Pot lid sealing ring | 1 pieces | |
| 2.Valve sealing ring | 6 pieces | |||
| Note: Total power:8.3KW Total weight approximately:270KG Voltage:380V50H(five-wire three-phase) |
||||
Yancheng KINGBEN adheres to the corporate philosophy of "honesty and friendship", establishing its business on integrity and winning the world with courtesy.1. We specialize in the production design and manufacture of production lines such as Softgel Capsule Production Line,Pharmaceutical Purified Water Treatment Line
){kind=link}